Publications (submitted / in revission)

  • M. Stingl, G. Leugering, T. Kufner, C. Strohmeyer, and, J. Semmler "Simulation and structural optimization of 3d Timoshenko beam networks based on fully analytic network solutions", in rev., ESAIM Mathematical Modelling and Numerical Analysis, (2018)
  • T. Kufner, G. Leugering, A. Martin, J. Medgenberg, J. Schelbert, L. Schewe, M. Stingl, C. Strohmeyer, and, M. Walther, "Towards a lifecycle oriented design of infrastructure by mathematical optimization", in rev., Optimization and Engineering, (2018)
  • D. Hübner, E. Rohan, V. Lukeš, and, M. Stingl, "Optimization of the porous material described by the Biot model", preprint: arXiv:1802.00581, in rev., International Journal of Solids and Structures, (2018)
  • F. Wein, N. Chen, N. Iqbal, M. Stingl, and, M. Avila, "Topology optimization of multi-material liquid absorbers", submitted to: Communications in Nonlinear Science and Numerical Simulation, (2018)
  • J. Semmler, K. Bley, R.N. Klupp Taylor, M. Stingl, and, N. Vogel, "Particulate coatings with optimized haze properties", submitted to: Advanced Optical Material, (2018)
  • D. Aßmann, F. Liers, and, M. Stingl, "Decomposable robust two-stage optimization: An application to gas network operations under uncertainty", Preprint 205, TRR 154, in rev., Networks, (2017)
  • D. Adelhütte, D. Aßmann, T. Gonzàlez Grandòn, M. Gugat, H. Heitsch, F. Liers, R. Henrion, S. Nitsche, R. Schultz, M. Stingl, and, D. Wintergerst, "Joint model of probabilistic/robust (probust) constraints with application to gas network optimization", Preprint 215, TRR 154, in rev., Mathematical Methods of Operations Research, (2017)

Publications (accepted)

  • D. Aßmann, F. Liers, M. Stingl, and, J. Veram, "Deciding robust feasibility and infeasibility using a set containment approach: An application to stationary passive gas network operations", accepted, SIAM Journal on Optimization, (2018)
  • S. Süß, W. Lin, O. Getmanenko, L. Pflug, T. Sobisch, W. Peukert, D. Lerche, and, D. Segets, "Suspension- and powder-based derivation of Hansen dispersibility parameters for zinc oxide quantum dots", accepted, Particuology, (2018)
  • A. Keimer, L. Pflug, and M. Spinola, “Nonlocal scalar conservation laws on bounded domains and applications in traffic flow”, accepted, SIAM Journal of Mathematical Analysis, (2018)
  • L. Pflug and M. Stingl "Multi-Material Optimization of Nanoparticles by Discrete Dipole Approximation and Sequential Global Programming", In T. Wriedt, Y. Eremin Eds. (Eds.), Proceedings of the Bremen Workshopon Light Scattering, (2018)
  • D. Hübner, C. Pobel, A. Kergaßner, J. Köpf, C. Körner, M. Markl, J. Mergheim, P. Steinmann, and, M. Stingl, "Topology Optimization Considering the Grain Structure of Additively Manufactured Inconel 718 using Numerical Homogenization", accepted, "Proceedings of 7th International Conference on Additive Technologies (iCAT)", (2018)
  • D. Hübner and M. Stingl, "On a combined geometry and multimaterial optimization approach for the design of frame structures in the context of additive manufacturing", accepted, "Proceedings of 7th International Conference on Additive Technologies (iCAT)", (2018)

Publications

  • S. Wawra, L. Pflug, T. Thajudeen, C. Kryschi, M. Stingl, and, W. Peukert, "Determination of the Two Dimensional Distributions of Gold Nanorods by Multiwavelength Analytical Ultracentrifugation", accepted, Nature Communications, (2018)
  • T. Kufner, G. Leugering, A. Martin, J. Medgenberg, J. Schelbert, L. Schewe, M. Stingl, C. Strohmeyer, and, M. Walther, "Towards a lifecycle oriented design of infrastructure by mathematical optimization", Optimization and Engineering, (2018)
  • K. Bley, J. Semmler, M. Rey, C. Zhao, N. Martic, R. Klupp Taylor, M. Stingl, and N. Vogel, “Hierarchical Design of Metal Micro/Nanohole Array Films Optimizes Transparency and Haze Factor”, Advanced Functional Materials (2018)
  • P. Schlegel, M. Stingl, M. Kunduk, S. Kniesburges, C. Bohr, and M. Döllinger, “Dependencies and Ill-designed Parameters Within High-speed Videoendoscopy and Acoustic Signal Analysis”, Journal of Voice (2018)
  • M. Stingl and F. Wein, “A combined parametric shape optimization and ersatz material approach”, Structural and Multidisciplinary Optimization 57, 1297–1315 (2018)
  • J. Semmler, L. Pflug, and, M. Stingl, “Material optimization in transverse electromagnetic scattering applications”, SIAM Journal on Scientific Computing 40, B85–B109 (2018)
  • A. Keimer, L. Pflug, and M. Spinola, “Existence, uniqueness and regularity of multi-dimensional nonlocal balance laws with damping”, Journal of Mathematical Analysis and Applications, 466, 18–55 (2018).
  • S. Werner, M. Stingl, and, G. Leugering, “Model-based control of dynamic frictional contact problems using the example of hot rolling”, Computer Methods in Applied Mechanics and Engineering 319, 442–471 (2017)
  • T. Meincke, H. Bao, L. Pflug, M. Stingl, and R. Klupp Taylor, “Heterogeneous nucleation and surface conformal growth of silver nanocoatings on colloidal silica in a continuous flow static T-mixer”, Chemical Engineering Journal 308, 89–100 (2017)
  • S. Werner, M. Kurz, M. Stingl and R. Doell, “Model-based optimization of short stroke control in roughing mills”, Steel Research International 88 (2017)
  • M. Wormser, F. Wein, M. Stingl and C. Körner, “Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization”, Materials 10 (2017)
  • A. Keimer and L. Pflug, “Existence, uniqueness and regularity results on nonlocal balance laws”, Journal of Differential Equations, 263, 4023–4069 (2017)
  • M. Distaso, O. Zhuromskyy, B. Seemann, L. Pflug, M. Mackovic, E. Encina, R. Klupp Taylor, R. Müller, G. Leugering, E. Spiecker, U. Peschel, and W. Peukert, “Interaction of light with hematite hierarchical structures: experiments and simulations”, Journal of Quantitative Spectroscopy and Radiative Transfer, 189, 369–382 (2017)
  • J. Greifenstein and M. Stingl, “Simultaneous parametric material and topology optimization with constrained material grading”, Structural and Multidisciplinary Optimization, 1–14 (2016)
  • H. Mitschke, F. Schury, K. Mecke, F. Wein, M. Stingl, and G. E. Schroder-Turk “Geometry: The leading parameter for the Poisson’s ratio of bending-dominated cellular solids”, International Journal of Solids and Structures 100, 1–10 (2016)
  • G. Leugering, L. Pflug, and M. Spinola, “Adjungierten-basierte prozessoptimierung der nanopartikel-synthese”, Chemie Ingenieur Technik, 88, 1366–1367 (2016)
  • F. Schury, J. Greifenstein, G. Leugering and M. Stingl, “On the efficient solution of a patch problem with multiple elliptic inclusions”, Optimization and Engineering 16, 225–246 (2015)
  • J. Semmler, L. Pflug, M. Stingl, and G. Leugering, Shape Optimization in Electromagnetic Applications, edited by G. L. Aldo Pratelli, Vol. 166, International Series of Numerical Mathematics (Springer), pp. 251–269 (2015)
  • W. Peukert, D. Segets, L. Pflug, and G. Leugering, Unified design strategies for particulate products, Vol. 46, Advances in Chemical Engineering (2015)
  • M. Haderlein, D. Segets, M. Gröschel, L. Pflug, G. Leugering, and W. Peukert, "FIMOR: an efficient simulation for zno quantum dot ripening applied to the optimization of nanoparticle synthesis”, Chemical Engineering Journal, 260, 706–715 (2015)
  • J. Greifenstein and M. Stingl, Simultaneous Material and Topology Optimization Based on Topological Derivatives, Vol. 443, IFIP Advances in Information and Communication Technology (Springer, Berlin Heidelberg), pp. 118–127 (2014)
  • B. Schmidt, G. Leugering, M. Stingl, B. Hüttner, A. Agaimy, and M. Döllinger, “Material and shape optimization for multi-layered vocal fold models using tran-sient loadings”, Journal of the Acoustical Society of America 134, 1261–1270 (2013)
  • F. Wein, M. Kaltenbacher, and M. Stingl, “Topology optimization of a cantilevered piezoelectric energy harvester using stress norm constraints”, Structural and Multidisciplinary Optimization 48, 173–185 (2013)
  • M. Prechtel, G. Leugering, P. Steinmann, and M. Stingl, “A cohesive crack propagation model: Mathematical theory and numerical solution”, Communications on Pure and Applied Analysis 12, 1705–1729 (2013)
  • A. Bauereiß, E. J. Ribeiro Parteli, D.-R. Riedlbauer, and M. Stingl, “Numerische Simulation pulver- und strahlbasierter additiver Fertigungsprozesse”, edited by D. Drummer, 117–130 (2012)
  • J. Schwerdtfeger, F. Schury, M. Stingl, F. Wein, R. Singer, and C. Körner, “Mechanical characterisation of a periodic auxetic structure produced by SEBM”, Physica Status Solidi B-Basic Solid State Physics 249, 1347–1352 (2012)
  • M. Prechtel, G. Leugering, P. Steinmann, and M. Stingl, “Optimal Design of Brittle Composite Materials: a Nonsmooth Approach”, Journal of Optimization Theory and Applications 155, 962–985 (2012)
  • G. Leugering, S. Nazarov, F. Schury, and M. Stingl, “The Eshelby Theorem and Application to the optimization of an Elastic Patch”, SIAM Journal on Applied Mathematics 72, 512–534 (2012)
  • M. Kocvara and M. Stingl, “Solving stress constrained problems in topology and material optimization”, Structural and Multidisciplinary Optimization 46, 1–15 (2012)
  • F. Schury, M. Stingl, and F. Wein, “Slope constrained material design”, Structural and Multidisciplinary Optimization 46, 813–827 (2012)
  • F. Schury, M. Stingl, and F. Wein, “Efficient two-scale optimization of manufacturable graded structures”, SIAM Journal on Scientific Computing 34, B711–B733 (2012)
  • M. Stingl and B. Schmidt, Parametric Shape Optimization Revisited, edited by G. L. J. S. Michael Hintermüller, Vol. 57, Oberwolfach Reports (European Mathematical Society Publishing House, Oberwolfach), pp. 3400–3403 (2012)
  • A. Yang, M. Stingl, D. A. Berry, J. Lohscheller, D. Voigt, U. Eysholdt, and M. Döllinger, “Computation of physiological human vocal fold parameters by mathematical optimization of a biomechanical model.”, Journal of the Acoustical Society of America 130, 948–964 (2011)
  • B. Schmidt, M. Stingl, G. Leugering, D. A. Berry, and M. Döllinger, “Material parameter computation for multi-layered vocal fold models”, Journal of the Acoustical Society of America 129, 2168–2180 (2011)
  • M. Triep, C. Brücker, M. Stingl, and M. Döllinger, “Optimized transformation of the glottal motion into a mechanical model”, Medical Engineering Physics 33, 210–217 (2011)
  • H. Mitschke, J. Schwerdtfeger, F. Schury, M. Stingl, C. Körner, R. Singer, V. Robins, K. Mecke, and G. Schröder-Turk, “Erratum: Finding auxetic frameworks in periodic tessellations”, Advanced Materials 23, 2669–2674 (2011)
  • H. Mitschke, J. Schwerdtfeger, F. Schury, M. Stingl, C. Körner, R. Singer, V. Robins, K. Mecke, and G. Schröder-Turk, “Finding Auxetic Frameworks in Periodic Tessellations”, Advanced Materials 23, 2669–2674 (2011)
  • J. Schwerdtfeger, F. Wein, G. Leugering, R. Singer, C. Körner, M. Stingl, and F. Schury, “Design of Auxetic Structures via Mathematical Optimization”, Advanced Materials 23, 2650–2654 (2011)
  • E. Goodyer, J. Jiang, E. Devine, A. Sutor, S. Rupitsch, S. Zörner, M. Stingl, and B. Schmidt, “Devices and Methods on Analysis of Biomechanical Properties of Laryngeal Tissue and Substitute Materials”, Current Bioinformatics 6, 344–361 (2011)
  • E. Bänsch, M. Kaltenbacher, G. Leugering, F. Schury, and, F. Wein. "Optimization of Electro-Mechanical Smart Structures". In Birkäuser Special Issue: Constrained Optimization and Optimal Control for Partial Differential Equations. Editors: Prof. Dr. G. Leugerin, Prof. Dr.-Ing. S. Engell, Prof. Dr. A. Griewank, Prof. Dr. M. Hinze, Prof. Dr. Dr. h.c. R. Rannacher, Prof. Dr. V. Schulz, Prof. Dr. M. Ulbrich, Prof. Dr. S. Ulbrich (2011)
  • M. Kocvara and M. Stingl, PENNON - software for linear and nonlinear matrix inequalities , edited by J. B. L. Miguel F. Anjos (Springer, New York), 755ff (2011)
  • M. Prechtel, P. L. Ronda, R. Janisch, A. Hartmaier, G. Leugering, P. Steinmann, and M. Stingl, “Simulation of fracture in heterogeneous elastic materials with cohesive zone models”, International Journal of Fracture (2010)
  • J. Haslinger, M. Kocvara, G. Leugering, and M. Stingl, “Multidisciplinary Free Material Optimization”, SIAM Journal on Applied Mathematics 70, 2709 (2010)
  • C. Kirmse, M. Triep, C. Brücker, M. Döllinger, and M. Stingl, “Experimental flow study of modeled regular and irregular glottal closure types”, Logopedics Phoniatrics Vocology 35, 45–50 (2010)
  • G. Leugering and M. Stingl, “PDE-constrained optimization for advanced materials”, GAMM Mitteilungen 33, 209–229 (2010)
  • G. Leugering, A. Martin, and M. Stingl, Topology and Dynamic Networks: Optimization with Application in Future Technologies, edited by V. M. Martin Grötschel Klaus Lucas (Springer, Berlin Heidelberg), pp. 263–276 (2010)
  • M. Stingl, M. Kocvara, and G. Leugering, “A sequential convex semidefinite programming algorithm with an application to multiple-load free material optimization”, SIAM Journal on Optimization 20, 130–155 (2009)
  • M. Stingl, M. Kocvara, and G. Leugering, “Free Material Optimization with Fundamental Eigenfrequency Constraints”, SIAM Journal on Optimization 20, 524–547 (2009)
  • G. Leugering, A. Martin, and M. Stingl, Topologie und Dynamische Netzwerke: Anwendungen Der Optimierung MIT Zukunft, edited by V. M. Martin Grötschel Klaus Lucas (Springer, Berlin Heidelberg), pp. 323–338 (2009)
  • M. Stingl, M. Kocvara, and G. Leugering, A New Non-linear Semidefinite Programming Algorithm with an Application to Multidisciplinary Free Material Optimization, Vol. 158, Internat. Ser. Numer. Math., pp. 275–295 (2009)
  • F. Wein, M. Kaltenbacher, E. Bänsch, G. Leugering, and F. Schury. "Topology optimization of a piezoelectric-mechanical actuator with single- and multiple-frequency excitation". In International Journal of Applied Electromagnetics and Mechanics, 30:201-221, (2009)
  • C. Kirmse, M. Triep, C. Brücker, M. Döllinger, and M. Stingl, Visualization of the flow through modulated irregular glottal gaps, edited by I. I. of Acoustics and Vibration, Vol. 5, pp. 2764–2771 (2009)
  • G. Leugering, A. Martin, and M. Stingl, Topologie und dynamische Netzwerke: Anwendungen der Zukunft, edited by V. M. M. Grötschel K. Lucas, acatechdiskutiert, pp. 323–340 (2008)
  • M. Kocvara and M. Stingl, Free Material Optimization: Towards the Stress constraints, Vol. 13, Oberwolfach Reports (European Mathematical Society Publishing House, Oberwolfach), pp. 620–622 (2008)
  • G. Leugering, M. Kocvara, and M. Stingl, A New Method for the Solution of Multi-Disciplinary Free Material Optimization Problems, edited by J. S. Karl Kunisch Günter Leugering and F. Tröltzsch, Vol. 13, Oberwolfach Reports (European Mathematical Society Publishing House, Oberwolfach), pp. 647–649 (2008)
  • M. Döllinger, A. Yang, M. Stingl, U. Eysholdt, and J. Lohscheller, “Biomechanical modeling of laryngeal dynamics”, 1–5 (2008)
  • M. Kocvara, M. Stingl, and J. Zowe, “Free material optimization: recent progress”, Optimization 57, 79–100 (2008)
  • S. Gaile, G. Leugering, and M. Stingl, “Free material optimization for plates and shells”, 312, 239–250 (2007)
  • M. Kocvara and M. Stingl, “On the solution of large-scale SDP problems by the modified barrier method using iterative solvers”, Mathematical Programming 109, 413–444 (2007)
  • M. Stingl, “Quadratic programming and affine variational inequalities: a qualitative study by G. M. Lee, N. N. Tam and N. D. Yen”, Mathematical Methods of Operations Research 65, 385–387 (2007)
  • M. Kocvara and M. Stingl, “Free material optimization for stress constraints”, Structural and Multidisciplinary Optimization 33, 323–335 (2007)
  • M. Stingl, On the solution of nonlinear semidefinite programs by augmented Lagrangian methods, Berichte Aus Der Mathematik (Shaker Verlag) (2006)
  • M. Kocvara and M. Stingl, The Worst-Case Multiple Load FMO Problem Revisited, edited by O. S. Martin Philip Bendsøe Niels Olhoff, Vol. 137, Solid Mechanics and Its Applications (Springer Netherlands), pp. 403–411 (2006)
  • M. Kocvara, F. Leibfritz, M. Stingl, and D. Henrion, “A nonlinear SDP algorithm for static output feedback problems in COMPLEIB”, IFAC Proceedings Volumes (IFAC-PapersOnline) 38, 1055–1060 (2005)
  • M. Kocvara and M. Stingl, “PENNON: A code for convex nonlinear and semidefinite programming”, Optimization Methods Software 18, 317–333 (2003)